Double Deep Racking

Overview of Double Deep Racking

Double deep is a variation of APR racking as the basic components are the same. However, the fork truck used is fitted with telescopic forks to allow the truck to reach into a rack to get a pallet from the rear of a rack. These forks can be fitted to any type of truck so can be used in conjunction with a reach truck, VNA truck or an articulated truck.

Features of Double Deep Racking

  • High stock density
  • More stock readily available when compared to drive in racking
  • Uses conventional equipment but with extending forks

Specifications of Double Deep Racking

  • Fork truck operators need specialist training
  • The rear pallet cannot be accessed without first moving the front pallet
  • Needs good housekeeping to be efficient
  • Back pallets de-rate at higher levels due to the telescopic forks

Uses of Double Deep Racking

Similar to Drive In racking this system is generally used when storing pallets of the same type and when stock rotation and pick faces are not a major concern.

Drawbacks of Double Deep Racking

  • Maximum height 8000-10000mm
  • Max weight at max lift is around 500kgs per pallet but we would recommend checking with a specialist fork truck supplier.
  • Aisle width typically 600mm to 700mm larger than single deep installation
Empty tab. Edit page to add content here.

Features of Double Deep Racking

  • High stock density
  • More stock readily available when compared to drive in racking
  • Uses conventional equipment but with extending forks

Specifications of Double Deep Racking

  • Fork truck operators need specialist training
  • The rear pallet cannot be accessed without first moving the front pallet
  • Needs good housekeeping to be efficient
  • Back pallets de-rate at higher levels due to the telescopic forks

Uses of Double Deep Racking

Similar to Drive In racking this system is generally used when storing pallets of the same type and when stock rotation and pick faces are not a major concern.

Drawbacks of Double Deep Racking

  • Maximum height 8000-10000mm
  • Max weight at max lift is around 500kgs per pallet but we would recommend checking with a specialist fork truck supplier.
  • Aisle width typically 600mm to 700mm larger than single deep installation

Cost and capacity ratio of Double Deep Racking